Top Ideas

  • 30

    Access SmartStat via web browser

    Heatmiser · 0 · Posted

    Allow authenticated browser access over the Internet to manage the settings on the 'SmartStat' - providing similar to the mobile apps, but from a laptop/PC browser.

  • 13

    Option to operate away from Cloud service

    Andrew · 0 · Posted

    I think it would be beneficial to have the option for the app to communicate directly with the stat rather than go through the cloud server when controlling locally in the house. This would improve response as the signal would be direct and also should the cloud service go down or be discontinued it wouldn't render the stat useless for remote control. 

    Message

  • 12

    0.5 degree temperature adjustments

    Andrew · 0 · Posted

    I think it would be good to be able to adjust and set the temperature half a degree for more control 

  • 9

    Backlight

    Heatmiser · 1 · Last reply by Ian

    It would be useful if there was a setting to allow the backlight to be switched off. I have two stats in a bedroom and the glow is not ideal when trying to sleep.

  • 6
    Declined

    API

    Heatmiser · 1 · Last reply by Heatmiser

    1. Please can you tell me when/if you intend to provide access to the API? I would ideally like to create an IFTTT (https://ifttt.com/recipes) recipe for the SmartStat e.g. if the temperature in one of my rooms drops/increases, then IFTTT will increase/decrease the temperature according to my rule set.

    2. Also, whilst on the subject of home automation, is there any update on whether SmartStart can be integrated with SmartThings? (https://www.smartthings.com/uk).  

    Thank you,
    Ish.

  • 4

    Improve temperature control

    Heatmiser · 2 · Last reply by Neil

    At the moment the SmartStat waits for the temperature to drop by 0.5C before restarting the boiler. There does not appear to be any proportional control as for example a Danfoss TP9 has.
    I would like to be able to set the temperature control to more like 0.25C of 0.3C. This would provide a better temperature control.

  • 0

    Energy Usage

    Heatmiser · 0 · Posted

    It would be good to see an energy history of when my stats are in use over a period of time. Maybe room by room and overall.

  • 0

    Lower minimum standy temperature

    Heatmiser · 0 · Posted

    I would like more flexibility in setting the standby minimum
    temperature. Ideally I would like to be able to set it to 1 or 2 deg C
    as I can for example do with a Honeywell Froststat. The present limit
    is 7 deg C  

    Adopting this suggestion would give the customer more flexibility in the way the Smartstat is configured for their requirements.

  • 0

    Office Mode

    Heatmiser · 0 · Posted

    For some customers it might be helpful to have a selection of "Home Mode/Office Mode" available where you have less slots available in "Office Mode".
    So for Office Mode it might be sufficient to just set the opening hours rather than having to deal with Wake Up/Leave/Return/Sleep.